EasySYNC CDM USB Serial Converter Driver 2.08.02 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	EasySYNC CDM USB Serial Converter Driver 2.08.02
Category	Other Drivers Tools
Manufacturer	EasySYNC
File Size	1.2 MB
Supported OS	Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 b

EasySYNC CDM USB Serial Converter Driver 2.08.02 Description

This package provides certified driver files used for USB Instruments, oscilloscopes and logic analyzers.

Available for:

- DS1M12
- USB2-F-7x01
- PS40M10

Release version

- WHQL version with various bug fixes and enhancements.

Release Fixes

- Improved read performance, particularly for faster interface modes such as the FT2232H single channel synchronous FIFO mode.
- Updated co-installer now allows specifying the index that COM port allocation should begin at.
- Detect error when application requests RTS_CONTROL_TOGGLE handshaking since this is not supported in hardware.
- Corrected error when setting baud rates for hi-speed devices.
- Fixed bug which caused FT_GetCOMPortNumber to fail.
- Added more languages to FTLang:
- Portuguese
- Fixed issue where Rx character events could stop being signalled.
- Resolved issue where location IDs were not returned for hosts above index

Driver Installation:

Driver installation can be completed in one of two ways:

1. The latest device drivers are available through the Microsoft Windows
Update service. When the Found New Hardware Wizard appears, allow it to find the drivers from the Windows Update service. For Windows 7, the user will need to open Device Manager, right-click on the device and select update drivers.
2. Download the latest device drivers available. Extract the files to a convenient location on your local drive. Connect the supplied USB cable to the device and the other end of the cable to a spare USB port on the PC.
The Windows “Found New Hardware Wizard” will appear. Select the choice to install the drivers from a specific location and then browse to the folder created in the previous step where you unzipped the files.

About Device Driver:

If you install this package, your device will be properly recognized by compatible systems, and might even benefit from new features or various bug fixes.

Please note that, even though other operating systems might also be compatible, we do not recommend you apply any software on platforms other than the specified ones. Doing so might cause the installation to crash, which could even render the device unusable.

When it comes to installing the package, the steps should not be much of a hassle because each manufacturer tries to make them as easy as possible; usually, you must make check for compatibility, get the package, run the available setup, and follow the instructions displayed on-screen.

However, due to the large number of devices out there and the various ways for applying these packages, it would be best if you refer to the installation manual first, to be sure of a successful update.

That being said, click the download button, and apply the present software on your product. Also constantly check with our website to stay up to speed with latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EasySYNC Drivers