NETGEAR GS716Tv3 Switch Firmware 6.3.1.16 Download

Posted at November 24, 2024 by PCI-DB Team

NETGEAR GS716Tv3 Switch Firmware 6.3.1.16 Description

Fixed Issues:

- Fixed the issue where the SFP status could randomly be turned off after a restart.
- Fixed the issue where the configuration file cannot be uploaded using DNS Name through HTTP.
- Fixed the issue where the VLAN Tag setting is not kept after reboot.
- Fixed the issue where the status of converted security MAC address learned from LAG is incorrectly displayed as 'Learned' in MAC table. It should be displayed as 'Static' instead.

Modifications:

- Few changes are made to pass Korea TTA test for IPv6.
- GUI page of "Maintenance > User Banner" is added to allow customer to display user-defined warning message on login page.
- Debug telnet via port number 60000 was disabled by default. User can enabled it whenever needed under GUI page of "Maintenance > Troubleshooting > Remote Diagnostics".

Known issues:

- Warning messages pop up when the HTTPS admin status is enabled. Workaround: Refresh the GUI screen.
- The cable test results sometimes show a much longer value. Workaround: Redo the cable test on the same port.

About Switch Firmware

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers