OCZ RevoDrive 3/RevoDrive 3 X2/Z-Drive R4 Driver 1.3.6.17083 for Server 2003 Download

Posted at April 29, 2024 by PCI-DB Team

OCZ RevoDrive 3/RevoDrive 3 X2/Z-Drive R4 Driver 1.3.6.17083 for Server 2003 Description

Changelog:

- Microsoft WHQL Certification.

Procedure To Create The Bootable Driver Floppy Disk:

1. Download the latest Z-Drive R4 Windows driver package on to a PC with a floppy disk drive.  
2. Unzip the contents of the Z-Drive R4 driver package on the PC.
3. Insert the blank floppy disk.
4. Format the 1.44MB floppy disk with the FAT32 file system.
5. Open the folder on the PC where the Z-Drive R4 driver package is located.
6. Copy the “ocz10xx” file to the root of the floppy disk (“A:\ocz10xx”).
7. Copy the “amd64” folder and contents to the root of the floppy disk (“A:\amd64\..”).
8. Copy the “txtsetup.oem” file to the “amd64” driver folder on the floppy disk.
9. Copy the “i386” folder and contents to the root of the floppy disk (“A:\i386\..”).
10. Copy the “txtsetup.oem” file to the “i386” driver folder on the floppy disk. 

About SATA / AHCI / RAID Preinstall Driver:

Download this package if you intend to switch the SATA settings between available modes (AHCI, RAID, or IDE) after an operating system has been installed.

Remember that if you modify these settings without applying the proper files, the OS will not be able to boot until requirements are met or changes are reverted.

As for the installation method, it would be best if you refer to the manufacturer’s update guide, read all the steps, and initiate this task only when you have completely familiarized yourself with the procedure.

Even though other platforms might also be compatible with this release, we strongly recommend that you apply the driver only on specified operating systems in order to successfully perform the installation. If a failure occurs, the computer could suffer serious malfunctions.

With these in mind, if you wish to modify the SATA settings according to the mode highlighted in this version, click the download button and make the desired changes. Visit our website as often as possible to stay up to date with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related OCZ Drivers