Linksys WRT54GL Router Tarifa Firmware 031 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Linksys WRT54GL Router Tarifa Firmware 031
Category	Router Switch Access Point
Manufacturer	Tarifa
File Size	9.6 MB
Supported OS	OS Independent

Linksys WRT54GL Router Tarifa Firmware 031 Description

Tarifa is a replacement firmware for the Linksys WRT54GL gateway/router. It adds a list of features, solves bugs and increases range and speed.

Changelog:

Added:
(b000) rc_startup en rc_shutdown in webpage
(b001) passwd security for logon to kernel
(b002) telnetd
(b003) full wds support with easy setup webpage
(b004) wds bridge to Lan mode
(b002) Tx-power setting in webpage (251 mw)
(b010) Tx-antenna and Rx antenna diversity setting in webpage
(b004) static dhcp in webpage
(b010) RSSI list for both WDS and Clients, TSSI, Txpower and Rate indicator to wireless-status webpage
(b010) sysinfo to Router-status page: uptime, loads and kernel memory usage.
(b010) Reboot button to Administration-management page
(b010) Loopback enable/disable option to Administration-management page
(b017) l2tp and pptp support for ddns.
(b018) Firmware Upgrade support for wrt54g, wrt54gl and wrt54gs firmware
(b019) Speedbooster support
(b026) support for wrt54g model v1 to v4, wrt54gl v1.0 and v1.1, wrt54gs v1 to v3 and wrt54gs v4
(b030) Remote syslog, klog and snmp option to Administration-management page
(b030) TCP syncookies, protection against DOS syn-flood attack

updated:
(b022) busybox 0.6 to 1.1.2
(b013) squashfs 2.0 to 2.2-r2
(b014) mksquashfs 2.0 to 2.1 (indexed, 64 kbyte block size)
(b025) imported code from WRT54GL_4.30.7 source
(b027) Netfilter / connection Tracking Remote DoS, CVE: CAN-2003-0187
(b027) Netfilter / NAT Remote DoS, CVE: CAN-2003-0467
(b028) Netfilter / iptables 1.2.7a to 1.3.5
(b030) MiniUpnpD-1.0-RC7, see: http://miniupnp.free.fr/
(b030) daylight saving time of US and Canada

solved:
(b007) CR/LF webpage to nvram and vica versa coverting issue, this concerns static-DHCP,rc_startup, rc_shutdown
(b028) incoming log, this doesn't work in the original firmware
(b013) webpage loading problem due java-script error for Ubuntu/Firefox/konqueror/etc
(b018) Dyndns expiration due to an automatic timeout, the host has not been updated for 30 days
(b020) Dyndns didn't update the dhcp-wan-ip, created by (b017)
(b024) Dyndns expiration due to wrong time saved
(b023) Bridge Restict mode change after boot
(b029) Netfilter / UPnP bug created by update (b028)
(b031) added miniupnpd_kill.sh for restarting miniupnpd

changed:
(b009) port forwarding from 10 to 20 input fields
(b022) dyndns messages after a successful update
(b025) Netfilter / increased performance for conntrack entry access
(b025) Netfilter / improved NAT hash-table population
(b028) Netfilter / decreased tcp_timeout to 4 mins
(b030) Netfilter / CONNTRACK set to maximum of 3079 connections, in case of a wrt54gs a maximum of 12289 connections

Firmware upgrade instructions:

1) Before you start, be sure you are using a PC that is connected to the WRT54G via a wired (Ethernet) connection.
2) Open your web browser (e.g., Internet Explorer, Netscape, etc.)
3) In the Address bar, type in the IP address of your router. The default IP
address is 192.168.1.1.
4) Leave the username blank and enter your password. The default password is "admin", all lower case.
5) Click on the Administration tab.
6) Click on Firmware Upgrade.
7) Browse for the firmware file that you have just extracted. The file name should end in .bin
8) Click the Upgrade button.
9) The router will begin its upgrade routine. Do not power off or unplug the router until the process is completed. This process may take up to 5 minutes to complete.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Tarifa Drivers