J-MICRON JMB36X RAID Controller Driver 1.17.08.01 WHQL Download

Posted at April 29, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	J-MICRON JMB36X RAID Controller Driver 1.17.08.01 WHQL
Category	Other Drivers Tools
Manufacturer	J-Micron
File Size	2.7 MB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

J-MICRON JMB36X RAID Controller Driver 1.17.08.01 WHQL Description

PCI Express to SATA II Host Controller



Overview
JMB360 is a single chip, one-lane PCI Express to one-port Serial ATA II Host Controller. The JMB360 is designed to provide one-port SATA II connectivity. The JMB360 supports both AHCI and Legacy IDE controller to increase system feasibility, including Native Command Queuing (NCQ), Hot Plugging, ATAPI Device Supporting, Port Multiplier with Command-based Switching Supporting, Programmable Output Swing Control to fit SATA II Gen1m and Gen2m (External SATA Connection, eSATA). It features PCI Express bus and Serial ATA II interface to express high performance storage devices.




Feature
Compliance
￭ Compliant with Serial ATA AHCI (Advanced Host Controller Interface) Spec. Reversion 1.0
￭ Compliant with Bus Master Programming interface for IDE ATA Controllers Revision 1.0
￭ Compliant with PCI Express Base Spec. Revision 1.0a
￭ Compliant with Serial ATA High Speed Serialized AT Attachment Spec. Revision 1.0a
￭ Compliant with Serial ATA II: Extensions to Serial ATA 1.0a Revision 1.1
￭ Compliant with Gen1m and Gen2m Serial ATA II: Electrical Spec. Revision 1.0




Overall
￭ Integrated 1-Lane PCI Express PHY and 1-port SATA II PHY
￭ Integrated two PLL for both PCI Express bus and SATA II interface
￭ Output swing control and Automatic impedance calibration for both PCI Express and SATA II PHY
￭ Supports up to 64K Byte external flash for BIOS expansion
￭ Supports a slave SMBus interface (follow System Management Bus Specification Revision 1.1)
￭ Fabricated 0.18um/3.3V UMC CMOS Standard Logic Process with 1.8V and 3.3V
￭ Available in 48-pin and 100-pin LQFP package




PCI Express
￭ Supports 1-Lane 2.5Gbps PCI Express bus
￭ Native design between PCI Express and SATA II
￭ All registers accessible in unified memory space


SATA II
￭ Supports 1-port 3.0Gbps SATA II interface
￭ Supports Native Command Queue (NCQ) on SATA II port
￭ Supports Hot Plugging like USB on SATA II port
￭ Supports SATA II Gen1m and Gen2m (External SATA Connection, eSATA)
￭ Supports Port Multiplier with Command-based Switching on SATA II port

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related J-Micron Drivers