ECS CDC-I (V1.0) Realtek LAN Driver 7.88.617.2014/8.34.617.2014 for Windows 7/Windows 8 Download

Posted at November 21, 2024 by PCI-DB Team

ECS CDC-I (V1.0) Realtek LAN Driver 7.88.617.2014/8.34.617.2014 for Windows 7/Windows 8 Description

Specifications:

- CPU
Intel D2700/D2500 Dual-core processor

- CHIPSET
Intel NM10 Express

- MEMORY
Single-channel DDR3 1066/800 memory architecture
2 x DDR3 SO-DIMM sockets support up to 4 GB
Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows 32-bit OS.

- EXPANSION SLOT
1 x PCI slot

- STORAGE
Support by Intel NM10 Express
2 x Serial ATA 3.0Gb/s devices

- AUDIO
VIA VT1705 6-channel High Definition audio CODEC

- LAN
Realtek 8105E 10/100 Lan
Realtek 8111E Giga Lan (Optional)

- REAR PANEL I/O
4 x USB 2.0 Ports
1 x D-sub(VGA)
1 x Serial port (COM1)
1 x Parallel port (LPT1)
1 x RJ45 LAN connector
1 x Audio port (3 holes jack)
1 x PS/2 keyboard & PS/2 mouse connectors

- INTERNAL I/O CONNECTORS & HEADERS
1 x 24-pin ATX Power Supply connector
1 x 4pin CPU_FAN connectors
1 x 3-pin SYS_FAN connector
2 x USB 2.0 headers support additional 4 USB 2.0 Ports
2 x SATA 3Gb/s connectors
1 x Case Open header
1 x S/PDIF out header
1 x Front panel switch/LED header
1 x Front panel audio header
1 x Speaker header
1 x Clear CMOS header
1 x LVDS connector(optional)

- SYSTEM BIOS
AMI UEFI BIOS with 32 Mb SPI Flash ROM

- FORM FACTOR
Mini ITX 170x170mm

About Ethernet Driver:

Windows platforms generally apply a generic driver that allows motherboards to recognize the Ethernet component.

However, in order to make use of all network card (adapter) features, you must install a proper LAN driver that enables the hardware. This task enables systems to connect to a network, as well as collect all component characteristics such as manufacturer and chipset.

If you intend to update the driver version, know that this process can add support for new OSes, fix different compatibility problems, resolve related errors encountered during the product’s lifetime, as well as include various other changes.

When it comes to the actual installation procedure, we should note that most producers try to make it as easy as possible, so following the steps should be a breeze: just get the downloadable package, run the setup, and follow the on-screen instructions.

There is a chance that other OSes could also be suitable, but it is not advisable that you install this release on platforms other than the specified ones. Remember to perform a system reboot once done, to allow all changes to take effect properly.

Therefore, if you wish to apply this version, click on the download button and enable your network card. To stay up to speed with the latest updates, check back with our website as often as possible.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related REALTEK Drivers