Ubiquiti UniFi AP/AP-LR Commotion Firmware 1.1 Upgrade Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Ubiquiti UniFi AP/AP-LR Commotion Firmware 1.1 Upgrade
Category	Router Switch Access Point
Manufacturer	Commotion
File Size	5.2 MB
Supported OS	OS Independent

Ubiquiti UniFi AP/AP-LR Commotion Firmware 1.1 Upgrade Description

Commotion Router is a distribution of OpenWRT Linux that supports certain wireless routers. The current Commotion release is v1.1 "Grumpy Cat".

Changes since v1.1rc2:

- Fixed a memory leak in the Commotion client API.
- Improved handling of bridge interfaces.
- Numerous fixes to input validation in the web interface.
- Upgrade to OLSRd v0.6.6.
- More reliable handling of app announcements.
- Updated user documentation.
- Official support for TP-Link WDR3600, TP-Link WDR4300, and Mikrotik RB411AH

Load the Software

1. Open your Web browser and enter http://192.168.1.20 in the address bar. This is the IP address of the router. The Ubiquiti AirOS web interface should load.
2. Log in to the interface:
Username: ubnt
Password: ubnt
3. Navigate to the System tab, under the "Firmware Update" section click “Browse” and choose the Commotion file that you downloaded for your specific router.
4. Click “Upload” and wait for the next prompt.
5. Click “Update.” The device will install the software. During this stage, the first and last light under the triangle will light, and then all of the other lights will go out, except for the power light.
6. After the lights all go out, the device will reboot. Wait a few minutes until the power light and one light under the triangle hold steady green.
While the node is restarting, change your computer's wired connection to receive a DHCP lease from the node.
7. Go to http://thisnode in your Web browser. If you see the Commotion screen, congratulations! You now have a Commotion wireless router!

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Commotion Drivers