PCI-DB.com
  1. Driver
  2. Network Ip Surveillance Baby Camera
  3. LILIN IPD6222 IP Camera Firmware 1.4.66

LILIN IPD6222 IP Camera Firmware 1.4.66 Download

Posted at March 29, 2024 by PCI-DB Team

Install Driver Automatically
Device NameLILIN IPD6222 IP Camera Firmware 1.4.66
CategoryNetwork Ip Surveillance Baby Camera
ManufacturerLILIN
File Size19.9 MB
Supported OSOS Independent

LILIN IPD6222 IP Camera Firmware 1.4.66 Description

This package provides the necessary installation files of LILIN IPD6222 IP Camera Firmware version 1.4.66. This firmware is compatible only with OS version 1.4.

Fixes/New features:

- Added Sony IMX222 sensor support.
- Added IPC0122 WiFi support.
- Updated ActiveX to 1.0.50.143 for GDI mode ActiveX OSD.
- Supported Wireless General page for IPC0122.
- Added description for corridor mode only for Navigator not NVR.

Installation steps:

1. Login into the IP Camera via IE.
2. Click on Configure->System->Firmware Update
3. Click on "Browse" button to locate the firmware file, flasham.bin.
4. Click on "OK" button.
5. Wait the web interface to be reloaded again.

WARNING!

- YOU DO NOT HAVE TO UPDATE YOUR DEVICE TO THE LATEST FIRMWARE. HOWEVER, THE LATEST FIRMWARE MAY IMPROVE A DEVICE'S PERFORMANCE AND ADD ADDITIONAL FEATURES.
- THERE IS A RISK OF FAILURE WHEN UPDATING A FIRMWARE, THIS INCLUDES POWER FAILURE, LOW BANDWIDTH OR BROKEN FLASH DISK. A FAILED FIRMWARE UPDATE WILL REQUIRE RETURNING THE DEVICE BACK TO YOUR ORIGINAL PROVIDER FOR REPAIR.

About Network Camera Firmware Update:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related LILIN Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.