LILIN NVR2400L IP Camera Firmware 1.1.5.8 Download

Posted at November 2, 2024 by PCI-DB Team

LILIN NVR2400L IP Camera Firmware 1.1.5.8 Description

Fixes:

1. Supported D-Link DWM-221,HUAWEI E3372h,ALCATEL L800 USB 3G/4G router.
2. Supported wizard for first time installation, language, password, time zone, HDD, network, auto camera configuration.
3. Fixed FireFox and Chrome for auto logout.
4. Improved HDD writing performance.
5. Supported domain name URL for IP camera.
6. Fixed GUI for camera setting for no access right.
7. Fixed RAID setting for HDD recovery of NVR1400 and NVR2400.
8. Supported auto detection for PTZ and panoramic cameras.
9. Supported PTZ UI at live view.
10. Fixed operator and guest access rights.
11. Supported HTML5 playback with alarm snapshots.
12. Added P2P for future use.
13. Added QR code for future use.
14. Supported SDDP only for LILIN products.
15. Upgraded UniversalApplet to 4.0.0.1.
16. Supported RTSP port number setting.
17. Supported USB MIC. Ask LILIN HQ for selling the certified USB MIC.
18. Supported NVR2400 for none-RAID version.
19. Supported RAID 0 and RAID 5 for three HDDs.
20. Fixed Safari not supporting JavaApplet issue.
21. Added Japanese language.
22. Supported day light saving time zone to 2016A.
23. Added GUI for buzzer and LED time.
24. Improved IR receiver for avoiding lights interference.

Update firmware from web interface

1. Login into the IP Camera via IE.
2. Click on Configure->System->Firmware Update
3. Click on "Browse" button to locate the firmware file, flasham32.bin.
4. Click on "OK" button.
5. Wait the web interface to be reloaded again.

WARNING!

YOU DO NOT HAVE TO UPGRADE THE LATEST FIRMWARE. HOWEVER, THE LATEST FIRMWARE CAN IMPROVE THE DEVICE's SYSTEM PERFORMANCE. THERE ARE ALSO RISKS FOR UPGRADING THE NEW FIRMWARE INCLUDING POWER FAILURE, LOW BANDWIDTH, or FLSAH DISK BROKEN.
THE RESULT MAY REQUIRE RETURNING the DVR BACK TO YOUR ORIGINAL PROVIDER FOR REPAIRING.

About Network Camera Firmware:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related LILIN Drivers