KLANG Vier Mixing System Firmware 2.1.0 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	KLANG Vier Mixing System Firmware 2.1.0
Category	Firmware
Manufacturer	KLANG
File Size	18.8 MB
Supported OS	OS Independent

KLANG Vier Mixing System Firmware 2.1.0 Description

This package provides the necessary installation files for KLANG Vier Mixing System Firmware version 2.1.0.

New features / Improvements:

- Major improvements for loading and storing show files and snapshots
- User independent relative Group Mixing
- ZeroConf IP address configuration for use without DHCP server
- Template names for faster channel labeling
- New Orbit view interface
- Bug fixes and improved stability

Dante improvements:

- AES67 support
- Latest Audinate Brooklyn II release included
- Advance switch configuration including Multicast (Dante Flows) filters
- Fixed IP address assignments

Note:

In order to install the firmware, you must download and install the Dante Firmware Update Manager.

Installation steps:

1. Open the Dante Firmware Update Manager.
2. Select the primary Dante network.
3. Select Update Dante Firmware.
4. Click Browse.
5. Browse to the directory in which you saved your firmware update files.
6. Select the required Dante firmware update file. The Firmware Update Manager will now scan for devices on the network that match the firmware update file, based on the module type, manufacturer and model.
7. View the discovered Dante devices, and select those you wish to update, by clicking the associated checkboxes.
8. Select Start. The Firmware Update Manager will start updating all selected devices.
9. Power cycle the Dante-enabled devices that have been upgraded, to finish applying the firmware update and restore your configuration. If the device is not power cycled or rebooted, the update will not be applied.

About Mixing System Firmware:

Updating the mixer’s firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transition effects, resolve different problems such as those regarding various noises heard in certain situations, and many other related improvements.

However, before downloading this package, go to the unit’s system information and make sure that the currently installed firmware isn’t either newer or matches this release. Moreover, you should know that an update failure might seriously damage the mixer’s software, so it is vital that you are familiar with the installation steps.

As for applying this release, you must transfer the downloadable package (or its content) to the mixer via any available methods, and power up the unit through various key combinations in order to enter update mode (make sure you read the product’s user guide).

This said, if you consider installing this release and you’re positive you have all the knowledge you need for a successful upgrade, download the package, and apply it to your mixer. Check with our website constantly so that you don’t miss any update that can improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related KLANG Drivers