MSI K8N Neo3 1.6 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	MSI K8N Neo3 1.6
Category	Bios
Manufacturer	Msi
File Size	267 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

MSI K8N Neo3 1.6 Description

Fixed BIOS report incorrect information for Turion64 CPU.


Specifications:

CPU

￭ Supports 64-bit AMD Athlon 64, Sempron and Turion64 processor (Socket 754)
￭ Supports up to 3200 , 3400 , 3700 or higher CPU
￭ Please refer to CPU Support for compatible CPU; the above description is for reference only.

Chipset

￭ NVIDIA nForce4-4X Chipset
- HyperTransport link to the AMD Athlon 64 CPU
- Supports single-channel DDR333/400 memory
- Supports PCI Express x16/x1 interface
- Two independent SATA controllers, for four drives
- Dual Ultra ATA 133/100/66 IDE controllers
- Supports high-speed USB2.0 ports

MSI Reminds you:
1. Please use MSI Live BIOS tool to upgrade BIOS of this product.
2. Because of the limitations of chipset, this MB does not support Win98/ME.


Main Memory

￭ Supports single channel, four-memory-bank DDR 333/400 using two 184-pin DDR
DIMMs
￭ Supports a maximum memory size up to 2GB without ECC
￭ Supports 2.5v DDR SDRAM DIMM


Slots

￭ One PCI Express x16 slot (PCI Express Bus specification v1.0a compliant)
￭ One PCI Express x1 slot (PCI Express Bus specification v1.0a compliant)
￭ Three 32-bit Master 3.3V/5V PCI Bus slots
￭ One AGR (Advance Graphics Riser) slot for compatible AGP VGA cards

The AGR slot is a special design that only supports compatible AGP VGA cards. For more detailed information on compatible AGP VGA cards, please refer here


On-Board IDE/SATA

￭ Dual IDE controllers on the nVIDIA nForce4-4X chipset provides IDE HDD/CDROM
with PIO, Bus Master and Ultra DMA 133/100/66 operation modes.
- Can connect up to 4 IDE devices.

￭ Supports 4 SATA ports with up to 150MB/s transfer rate.

￭ NV RAID (Software)
Supports up to 4 SATA and 4 ATA133 Hard drives
- RAID 0, 1, 0 1, or JBOD supported
- RAID function available for PATA133 SATA H/D drives
MSI Reminds You...
￭ The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.


Audio

￭ RealTek ALC655 6 Channel software audio codec
- Compliance with AC97 v2.3 Spec.
- Meet PC2001 audio performance requirement.


LAN

￭ Marvell PHY 88E1111 Gigabit Ethernet chip


USB Interface

￭ 10 USB ports
- Controlled by nForce4-4X chipset
- 4 ports in the rear I/O, 6 ports via the external bracket


Internal I/O Connectors

- ATX 24-Pin power connector
- 4-pin ATX 12V power connector
- CPU / NB / System FAN connectors
- 1 x Floppy disk drive connector
- 4 x serial ATA connectors
- 2 x ATA133 HD connectors
- Front panel audio connector
- Front USB connectors: JUSB1, JUSB2, JUSB3 connector support additional 6 ports
- Front panel connector
- Serial port header
- CD-in connector
- Chassis intrusion switch connector
MSI Reminds You...
￭ The floppy disk cable will be optional.


Back Panel I/O Ports

- 1 x Parallel
- 1 x Serial port (COM 1)
- 1 x PS/2 Keyboard
- 1 x PS/2 Mouse
- 1 x Audio I/O (Line-in/Line-out/MIC)
- 4 x USB 2.0
- 1 x RJ45 LAN Jack


BIOS

￭ The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and
expansion cards of the board automatically.
￭ The mainboard provides a Desktop Management Interface(DMI) function which records your
mainboard specifications.


Dimension

￭ 30cm(L) x 18.5cm(W) ATX Form Factor

Mounting

￭ 6 mounting holes.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Msi Drivers