Extron DTP T FB 332 DTP Transmitter Firmware 1.01 Download

Posted at April 27, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Extron DTP T FB 332 DTP Transmitter Firmware 1.01
Category	Firmware
Manufacturer	Extron
File Size	3.3 MB
Supported OS	OS Independent

Extron DTP T FB 332 DTP Transmitter Firmware 1.01 Description

This package provides the necessary installation files of Extron DTP T FB 332 DTP Transmitter Firmware 1.01. This firmware applies only to DTP T FB model with part number 60-841-52 (DTP T FB 332).

Fixes:

- Fixed Issue (originated in v1.00): Embedded analog audio is not properly recognized on certain displays. Certain displays would not output an audio signal when analog audio was embedded using the DTP T FB. This issue has been resolved with firmware version 1.01.

Installation steps:

1. Download the firmware file.
2. Run the .exe file downloaded to extract the firmware file.
3. Connect the computer to the side panel Remote RS-232 port or top panel Configuration port of the switcher.
4. Start the Product Configuration Software and connect to the unit.
5. Click Tools > Update firmware. The software asks you to confirm that you want to continue the update.
6. Click Continue. The Product Configuration Software disconnects itself from the unit and calls the Firmware Loader utility in the background. The Update Firmware dialog box appears.
7. Click Browse . The Open dialog box opens.
8. Navigate to the folder where you saved the firmware upgrade file. Select the file and click Open . The Update Firmware dialog box returns to the top.
9. Click Update to continue. The Firmware Loader utility tests the connection, installs the update, and then verifies the firmware. At the conclusion of the process, the utility reports Upload Complete.
10. Click Close. The Product Configuration Software window returns to the front.
11. Click the in the connection tab to completely disconnect the program from the unit and then reconnect the program.

About DTP Transmitter Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Extron Drivers