NETGEAR DGND3700v2 Router Firmware 1.1.00.26 NA Download

Posted at December 18, 2024 by PCI-DB Team

NETGEAR DGND3700v2 Router Firmware 1.1.00.26 NA Description

Changes:

- Fixed the issue where no message pops up when selecting the option "no, I want to configure the Internet connection myself" and clicking on "Next" button, in Genie wizard.
- Fixed the issue where the Wireless setting and Guest management page setting cannot be applied, and channel shows abnormal.
- Fixed the issue where the FTP port and HTTP port cannot be set, in USB advanced setting page.
- Fixed the issue where the "Add keyword" button does not work, in block sites page.
- Fixed the issue in which the invalid value(for example: set email address to 'r') of email server address can be set, in Email page.
- Fixed the issue where the newly added rule and edit rule shows abnormal, in static router page.
- Fixed the issue where the apply button does not work, in remote management page.
- Fixed the issue where the bandwidth value can be set to invalid value(not digital value,such as 'w'), in QoS setup page.
- Fixed the issue where no warning message pops up while entering invalid IP value,for example,change ip to '192.168.1.e', in LAN setup page.
- Fixed the issue where no warning message pops up when no values are entered in add an Auto policy or manual policy,and clicking on Apply, in VPN policies page.

To Upgrade:

- To reach the Upgrade menu, click Router Upgrade from the Maintenance section.
- Download and extract the new firmware to a convenient place such as your desktop.
- Using a web browser, login to the router as admin.
- Click ADVANCED tab > Administration > Firmware Upgrade.
- Click Browse and locate the upgrade file.
- Click Upload.
- Wait for the upgrade progress bar to complete and final prompt to appear.

Important Note:

- The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.
- If the upgrade progress bar on web GUI doesn’t display correctly during firmware upgrade, you can still check the status using Power LED. The Power LED should be blinking (amber) during firmware upgrade. After firmware upgrade is done and boots up the system, it changes to steady amber color.
- Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it may result to a corrupt firmware and cause the device not to work.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers