Extron RGB-DVI 300 Video Scaler Firmware 1.16 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Extron RGB-DVI 300 Video Scaler Firmware 1.16
Category	Firmware
Manufacturer	Extron
File Size	2.2 MB
Supported OS	OS Independent

Extron RGB-DVI 300 Video Scaler Firmware 1.16 Description

This package provides the necessary installation files of Extron RGB-DVI 300 Video Scaler Firmware version 1.16.

Fixes:

- Improved factory calibration procedure to facilitate accurate RGB / YUV uniformity - Implemented a firmware update to provide for more accurate and uniform factory calibration. This update in no way affects customer facing unit operation.

Installation steps:

1. Download the firmware file.
2. Power on the scaler and a computer with internet access.
3. Connect the computer to the video scaler through either the front panel Config port or the rear panel RS-232 captive screw connectors.
4. Open the Extron Firmware Loader by double-clicking on the desktop icon or selecting it from the start menu. The Connection dialog box opens.
5. From the drop-down menus, select the device name, the connection method ( RS-232 ), the COM port, and the baud rate.
6. Click on the connect button. When the connection is made, the name of the device appears, with a green check mark, in the Connected Device box.
7. Click the Browse button and navigate to the folder where the firmware file was saved.
8. Click Add button. The Add Device screen closes to reveal the main Firmware Loader window.
9. Click the Begin button. The firmware transfer takes approximately 3 minutes. The progress of the transfer is shown by a green bar in the Total Progress panel.
NOTE: During the firmware upload, the front panel LED and video output are disabled.
10. When the transfer is complete, the Progress column in the Devices pane reads 100% and the Status column reads Complete.

About Video Scaler Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Extron Drivers