SweetPea SP3-200 MediaPlayer Firmware 1.01.06 Download

Posted at December 3, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	SweetPea SP3-200 MediaPlayer Firmware 1.01.06
Category	Dvd Bluray Media Players
Manufacturer	SweetPea
File Size	45.8 MB
Supported OS	OS Independent

SweetPea SP3-200 MediaPlayer Firmware 1.01.06 Description

This firmware provides the following fixes and enhancements:
- solves battery not charging problem
- solves problem with player locking up
- significantly increases play time on a battery charge
- reduces brightness of backlight. Dims backlight 10 seconds after last button pressed. Turns off backlight 45 seconds after last button pressed.
- certain .m4a songs no longer cause the player to lock up
- goes straight back to play mode after selecting playlist
- prevents player waking up unexpectedly
- solves problem with clock resetting to 12:00PM
- adds power down option on power button
- adds firmware and model information in the device menu

Who should update

Everyone with an SP3-200 (including newly shipped units directly from the factory). (Note this is NOT applicable to the SP3R-200)

Update Procedure

The update procedure depends on whether or not your player is being recognized by your computer.

Follow either section A or section B below.

A. Follow these instructions to update your SweetPea3 if your computer recognizes the device when it is plugged in.
1 - Back up your songs. Create a folder on your desktop and drag all the folders from the SweetPea3 to this folder.
2 - Download the firmware file (.hex) to your computer. This file must be called UPGRADE.HEX. Do not rename it. Do not try to run this program, you just need to download it to your computer.
3 - Plug the SweetPea3 to your computer and copy the downloaded file (UPGRADE.HEX) to any location on the SweetPea3.
4 - Unplug the SweetPea3. Enter the settings menu on the device (long press on the middle button). Select Device Settings > Auto Upgrade. Let it go through the process. The player will eventually reset itself and power up.
5 - If the player is not powering up after the update, try pressing the reset button by inserting a paper clip in the small hole above the volume buttons.

B. Follow these instructions to update your SweetPea3 if your computer does not recognize the device when it is plugged in. Note this can only be done on a PC and is not Mac compatible.
1 - Download the firmware file (.fw) and save it somewhere on your computer. Do not try to run this program, you just need to download it to your computer.
2 - Download the updater program (.zip) and save it somewhere on your computer.
3 - Open the zip file and run the setup.exe. Follow the onscreen instructions to install the program.
4 - When done, run the program by clicking on the Windows Start button (lower left corner of your screen). Select All Programs > Action Tools > Audio Product Tool 1.03 > Audio Product Tool
5 - Select the firmware file you downloaded in Step 1 above. Click Replace
6 - Uncheck Flash Erase
7 - While holding down the Volume Down button on your SweetPea3, plug in the SweetPea3 to your computer. Release the button.
8 - Click the onscreen Down button when it is enabled. If the button is not enabled, try resetting the unit (paper clip in hole about volume buttons) while holding down the Volume Down button.
9 - Allow the software to program the SweetPea3 and unplug it when finished updating. Note that your battery may require charging. If the update fails, unplug the SweetPea3 and try again from step 7.
10 - If the player is not powering up after the update, try pressing the reset button by inserting a paper clip in the small hole above the volume buttons.

About Media Player Firmware:

Installing a firmware update for your Media Player improves the general user experience by adding new features, fixing bugs, and enhancing the compatibility of your device, in order to play various formats of audio and video content.

By updating your Media Player, you can actually prolong the device’s life because, this way, it will be in sync with the new industry standards for content creation.

However, the process of updating your device is a risky one if not done according to strict instructions, such as: make sure that the firmware you have downloaded is compatible with your device, and don’t interfere with the player during the update process.

The most common method of upgrading your Media Player is by using a USB stick or update DVD. Although this process is very straightforward, each device has certain particularities that you must take into account.

If you consider using this update for your Media Player, feel free to click the download button, install the firmware and enjoy. Check out our website as often as possible to keep your Media Player up to date with the latest software and firmware. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related SweetPea Drivers