Intel R1000WT Server System Firmware 01.01.0005 Download

Posted at December 21, 2024 by PCI-DB Team

Intel R1000WT Server System Firmware 01.01.0005 Description

Versions:

- BIOS: 01.01.0005
- ME: 03.00.07.114
- BMC: 01.10.7004
- FRUSDR: 1.03

Fixes in BIOS R01.01.0005:

- SEL intermittently reports therm trip

Known Issues in ME 03.00.07.114:

- If host main power delayed relatively to the standby power for 720-770ms ME stop .
- Unable to set Alert Threshold Limit to 0 degrees (minimum from capabilities) for Inlet Temperature Trigger Type Policy.
- [MESDC] Compliance Test 7.8 Set PSU Configuration w/Power Cycle is failed.
- [MESDC] ME FW Status in S3 State is failed.
- During Host Warm Reset flow, unexpected Intel? SPS 3.0 E5 Firmware exception may be promoted to Platform Global Reset.
- When auto configuration is performed and efficiency readings are provided from BMC, ME keeps requesting PSUs for readings.
- Permanent Node Busy completion code received when trying to ColdReset ME after setting new value of SlopeComp and Offset coefficients.
- NM constantly forces RAPL limit 2 to 0 Watt after a series of SMBAlerts.
- NM policy power range for memory domain is changed to incorrect values after NM PTU characterization is run.

Fixes in BMC 01.10.7004:

- Do not log extra failures on CATERR

Fixes in FRUSDR 1.03:

- Fixed a problem with System Airflow record in R2224 and R2312 chassis.
- BMC shows sensor for PS2, IO module, and SAS module when they are not present

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers