Canon EOS 5D Mark III Digital Camera Firmware 1.2.1 Download

Posted at May 12, 2024 by PCI-DB Team

Canon EOS 5D Mark III Digital Camera Firmware 1.2.1 Description

Fixes:

1. Uncompressed HDMI output is now enabled.
2. Enables the center AF point to autofocus when the camera is used with Canon EF lens/extender combinations whose combined maximum aperture is f/8.
3. Improves the speed of the camera's acquisition of focus when using a Canon Speedlite's AF-assist beam.
4. Fixes a phenomenon in which the LCD monitor may freeze and display Err 70 or Err 80 when a still photo is taken during Live View or in movie shooting mode.
5. Fixes a phenomenon that may occur when the continuous shooting priority setting is enabled for multiple exposures, such that, after the sixth image is taken, there is a slight pause before the remainder of the sequence is completed.
6. Fixes a phenomenon in which the viewfinder display shows incorrect information during AEB shooting.
7. Communication with the WFT-E7 Wireless File Transmitter has been improved.
8. When images have been successfully transferred with the WFT-E7 Wireless File Transmitter through the FTP protocol, an "O" will be displayed. When images have not been successfully transferred with the WFT-E7 Wireless File Transmitter through the FTP protocol, an "X" will be displayed.
9. Fixes a phenomenon in which the camera may not function properly when an Eye-Fi card is used.
10. Fixes a phenomenon in which the focal length value listed in the Exif information is not displayed correctly for images shot with the EF 24-70mm F4L IS USM lens.
11. Fixes a phenomenon in which the lens firmware cannot be updated properly.
12. Corrects errors in the Arabic language menu.
13. Fixes a phenomenon in which the camera changes the AF microadjustment value to -8.
14. Fixes a phenomenon in which the on-screen guidance cannot be fully displayed when setting the maximum limit value for the "Setting the ISO Speed Range for Auto ISO" option.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related CANON Drivers