Extron TouchLink TLP Pro 720 Touchpanel Firmware 2.00.0003-b003 Download
Posted at April 29, 2024 by PCI-DB Team
Install Driver Automatically| Device Name | Extron TouchLink TLP Pro 720 Touchpanel Firmware 2.00.0003-b003 |
|---|
| Category | Firmware |
|---|
| Manufacturer | Extron |
|---|
| File Size | 67.5 MB |
|---|
| Supported OS | OS Independent |
|---|
Extron TouchLink TLP Pro 720 Touchpanel Firmware 2.00.0003-b003 Description
This package provides the necessary installation files of Extron TouchLink TLP Pro 720 Touchpanel Firmware version 2.00.0003-b003.
Fixes:
- Add support for GCP 2.0.0 systems – Configurations created by Global Configurator 2.0.0 are now supported.
NOTE - This version of firmware breaks backward compatibility. See compatibility chart for details.
- Added support for Custom SSL Certificates – Custom SSL certificates are now supported.
- Fixed Issue (originated in 1.04.0000-b006) - Popup priority is not preserved when flipping pages – The selected popup page may not be preserved on a page when flipping to and from the page with popups. This issue has been resolved in version 2.00.0003-b003.
- Fixed Issue (originated in 1.04.0000-b006) - Modal popups are not appearing when a modal is already shown – Modal popup pages could not be changed if multiple modal popups are shown. This issue has been resolved in version 2.00.0003-b003.
- Fixed Issue (originated in 1.04.0000-b006) – GUI on TLP Pro 320M and 320C screens appear rotated 90 degrees – Under certain conditions the TLP Pro 320M/ 350C GUI is rotated 90 degrees. This issue has been resolved in version 2.00.0003-b003.
- Fixed Issue (originated in 1.04.0000-b006) - TLP Pro 320C/720C screen wakes while cable cubby lid is closed – Certain actions may cause the TLP screen to wake while the cable cubby lid is closed. This issue has been resolved in version 2.00.0003-b003.
- Fixed Issue (originated in 1.04.0000-b006) - Communication LED setting is not retained on a power cycle – The Communication LED setting on the TLP Pro 320M/C in the setup menu is not retained through a power cycle. This issue has been resolved in version 2.00.0003-b003.
- Fixed Issue (originated in v1.00.008) –TLP Pro boot failure - On rare occasion, the TLP Pro 720 and 1020 Series touchpanels may fail to boot properly, and would require being sent back to the factory for repair. This issue has been resolved in version 1.04.0000-b006.
- Added Feature – Added support for TLP Pro 320 Series Touchpanels – The firmware now supports TLP Pro 320 Series touchpanels.
Installation steps:
1. Power on a computer that is connected to the same network as the Touchpanel.
2. Download the firmware .exe file for the touchpanel and run it to extract the firmware.
3. Open your browser and type the IP address of the touchpane; unit into the address box. The browser opens the TouchLink panel web pages.
4. Click the Configuration tab at the top of the page
5. Select Firmware Upgrade from the bar on the left.
6. Use the Browse button to navigate to and select the firmware file that was saved in step 2.
7. Click Upload. The Touchpanel screen shows the message Firmware Uploading... Please Wait... . When the firmware is uploaded, the screen shows the message Restarting... . Once the firmware is installed, the panel can be calibrated using the on-screen menus or the TouchLink panel web pages.
About Touchpanel Firmware:
Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.
On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.
When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.
As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.
Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related Extron Drivers