Extron IPL T S4 IP Link Control Processor Firmware 1.17 Download

Posted at April 24, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Extron IPL T S4 IP Link Control Processor Firmware 1.17
Category	Firmware
Manufacturer	Extron
File Size	2.4 MB
Supported OS	OS Independent

Extron IPL T S4 IP Link Control Processor Firmware 1.17 Description

This package provides the necessary installation files of Extron IPL T S4 IP Link Control Processor Firmware version 1.17.

Fixes:

- Relays close when power is applied – When power is applied to the IPL 250 or IPL T CR48, the relays are closed instead of open as should be by default. This issue has been resolved; the relay ports will be open when power is applied.

Installation steps:

1. Download the firmware file.
2. Connect the PC to the device via the Ethernet port.
3. Access the device using the HTML pages.
4. Click the Configuration tab.
5. Click the Firmware Upgrade link.
6. Click the Browse button. An open file window appears.
7. Navigate to the folder where the firmware upgrade file was saved. Select the file.
NOTE: Valid firmware files must have the file extension ‘.S19’. Any other file extension is not a firmware upgrade. The original factory-installed firmware is permanently available on the device. If the attempted firmware upload fails for any reason, the device automatically reverts to the factory-installed firmware.
8. Click Open .
9. Click Upload . The firmware upload to the device can take a few minutes.

About IP Link Control Processor Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Extron Drivers