Hasselblad H2F Camera Body Firmware 9.5.1/1.1.1 Download

Posted at December 31, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Hasselblad H2F Camera Body Firmware 9.5.1/1.1.1
Category	Scanner Digital Camera Webcam
Manufacturer	Hasselblad
File Size	630 KB
Supported OS	OS Independent

Hasselblad H2F Camera Body Firmware 9.5.1/1.1.1 Description

This package provides the necessary installation files of Hasselblad H2F Camera Body Firmware version 9.5.1/1.1.1.

Fixes:

- Support for the 3043356 Battery grip rechargeable 2900 / Li-Ion

Installation steps:

1. In order to perform the update a compatible digital capture unit must be attached to the camera body. Compatible models are: Hasselblad CF, CFH.
2. Remove lens and viewfinder and connect the camera to the host computer using a FireWire cable.
3. Make sure the computer has a fresh battery or is powered from the mains supply.
4. Start Phocus and when the camera is connected, as indicated by an active camera icon in the top left part of the screen, select “Update Firmware...” from the “File“ menu.
5. Browse to the location where the update file was saved and follow the instructions on screen. The update procedure will take a few minutes to finish.

Important notice:

- During the upgrade procedure do NOT disconnect the firewire cable until prompted!
- Unintentionally removing the Firewire cable during the firmware download procedure could in worst case render the camera useless which would require the need for authorized service.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Hasselblad Drivers