Plextor PlexTool Utility 1.2.2 Download

Posted at December 22, 2024 by PCI-DB Team

Plextor PlexTool Utility 1.2.2 Description

Changes:

- Plextool offers Plextor SATA series SSD support

PLEXTOOL is designed exclusively for Plextor SSDs. If you use SSDs of other brands, you may not get complete information by PLEXTOOL. Please create partition(s) for your SSDs before executing PLEXTOOL, or your PLEXTOOL can not work smoothly.

Sometimes security frozen lock might be enabled by BIOS, so that you had better to re-plug your drive before executing secure format. Once your Plextor SSD is an external drive, secure format can only be executed through a SATA-USB adapter which supports ATA/ATAPI Packet Command Set and ATA/ATAPI LBA48 addressing mode. If not, your PLEXTOOL might not be able to work smoothly. Please do follow the popping-out instructions during the process to make sure you execute this function successfully.

PLEXTOOL can only support Plextor M2P, M3, M3P, M5S, M5P(ro) and afterwards. Before start PLEXTOOL, please remember to upgrade FW to latest version.

To install this package please do the following:

- Save the downloadable package on an accessible location (such as your desktop).
- Unzip the file and enter the newly-created directory.
- Locate and double-click on the available setup file.
- Allow Windows to run the file (if necessary).
- Read EULA (End User License Agreement) and agree to proceed with the installation process.
- Follow the on-screen instructions.
- Close the wizard and perform a system reboot to allow changes to take effect.

About SSD Utility:

The Solid-State Drive (SSD) utility is an update that properly recognizes the SSD unit(s) installed on your system. It also displays various pieces of information regarding the connected storage devices and searches for a new suitable firmware version.

However, before you consider downloading this version, carefully read the release notes for changes that can apply to your SSD. Once you have updated your drive, reboot to make sure that all modifications take effect.

When it comes to installing this software, the steps are very easy because all you have to do is get the downloadable package (extract it if necessary) and run the available setup. Once the installation is complete, run the utility and follow the instructions for updating the SSD.

That being said, make sure this utility version has a new firmware version available for your solid state drive and, if so, hit the download button, and install the software. Otherwise, check with our website as often as possible so that you don't miss the release that can improve your SSD.  

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Plextor Drivers