Renesas Electronics uPD720200 USB 3.0 Controller Firmware Updater 3.0.3.4 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Renesas Electronics uPD720200 USB 3.0 Controller Firmware Updater 3.0.3.4
Category	Motherboard
Manufacturer	Renesas
File Size	1.8 MB
Supported OS	Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit

Renesas Electronics uPD720200 USB 3.0 Controller Firmware Updater 3.0.3.4 Description

"F303408FWUP1.EXE" updates uPD720200 FW from verion 3.0.2.8 or older
to 3.0.3.4. If the FW version is 3.0.3.4 or later, it does not update.
Note1 : F303408FWUP1.EXE is uPD720200 CS sample or Mass Product whose revision ID of PCI Configuration Register is 3h.
Note2 : If uPD720200 is not detected on the target PC, F303408FWUP1.EXE does not start to update.
Note3 : If multiple uPD720200s are detected on the PC, F303408FWUP1.EXE does not start to update. 
Note4 : F303408FWUP1.EXE updates FW regardless of SSID and SVID in the serial ROM.
(If you want to limit the update target to the device with specific SSID
and SVID, you can generate the update file with "FW Updater Generator".)
Note5 : Users must restart or shoutdown after updating the FW. 

Usage

1. Disconnect all USB devices connected with the USB3.0 ports.
2. Execute "F303408FWUP1.EXE".
3. Show the License Agreement. If you accept all the terms of the
preceding License Agreement, please select "I accept".
4. Show the precaustions. Please check all items.
5. Press "Update" button.
6. After updating, let you restart the computer.
7. Confirm FW Version.
On the Start menu, click All Programs, RENESAS Electronics,
USB3.0 Host Controller Driver, and then USB3.0 Hsot Controller Utility.
8. Show USB3.0 Host Controller Information. If "Firmware Version" is 3034,
you succeed in updating FW.

The following problems are fixed.

1. Fixed the USB3.0 Host Controller in D3hot didn't send the PME Message 
when it received any wakeup events.
2. The following issue is fixed by ver 2.1.19.0 of RENESAS USB 3.0 Host
Controller Driver, but there was a possibility that this could still
occur in Windows 8:
[RENSAS USB 3.0 Host Controler Driver ver 2.1.19.0's history]
1. USB3.0 devices aren't detected when users perform the below steps.
a) Turn on a PC.
b) Enter sleep (S3 state) without connecting USB3.0 devices.
c) Connect USB3.0 devices to a USB3.0 port during S3 state.
d) USB 3.0 HDD isn't detected.
The USB3.0 devices aren't detected after the PC resumes from S3 state.
With Windows 7 or earlier, this issue only occurs with driver Ver.2.1.16.0.
3. There is a possibility that the USB 3.0 Host controller cannot notify 
the xHCI Driver when the Host controller receives the following contiguous
Device Notification Transaction Packets: Function Wake Notification,
Latency Tolerance Message (LTM) Device Notification, Bus Interval Adjustment Message Device Notification. We have never seen this problem on a real system.
4. Improved the interoperability of UAS devices in Windows 8.

About On-board USB Driver:

Windows operating systems automatically apply a generic driver that allows users to transfer files using the USB (Universal Serial Bus) port; however, installing the appropriate software can bring about significant changes.

If the proper USB software is installed, systems will benefit from improved compatibility with different devices, numerous fixes regarding USB issues, and various other changes that can increase transfer speed with external storage drives.

When it comes to the installation steps, simply check to make sure that the download record is compatible with your system characteristics, get the package, run the setup, and follow the on-screen instructions for a complete update.

Bear in mind that even though other OSes might be compatible, it would be best if you applied this package only on specified platforms. In addition to that, as technology evolves from one day to another, we recommended that you always use the latest software available.

That being said, click the download button, get and apply the present version and enjoy your newly updated system. Also, constantly check back with our website to find out when a new version is available.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Renesas Drivers