CenturyLink ZyXEL PK5000Z WiFi Modem Firmware 3.4.023.0 Download

Posted at December 26, 2024 by PCI-DB Team

CenturyLink ZyXEL PK5000Z WiFi Modem Firmware 3.4.023.0 Description

Upgrade Firmware:

1. To start the firmware upgrade, open a web browser and go to http://192.168.0.1 or http://modem.
2. Login to your modem by doing the following:
- Enter the Administrator Username: admin (bottom of the modem)
- Enter the Administrator Password: (bottom of the modem)
- Select "Apply".
3. Select "Utilities".
4. Select "Upgrade Firmware".
5. Check the "Upgrade Status". If the upgrade status shows:
- Upgrade Firmware proceed to the next step to upgrade the firmware.
- Firmware is up to date or N/A you are done.
6. To download the latest firmware, you can:
- Select the "Download" button in the modem GUI or download the latest firmware
7. Select the drop down next to 'Save'.
8. Select the "Save as".
9. Select "Desktop".
10. Select "Save".
11. Select "Browse".
12. Select "Desktop".
13. Select the firmware file that you just saved to your desktop.
14. Select "Upgrade Firmware".
15. This screen will show the progress of the upgrade. This step will take about 2 minutes.
16. This screen tells you the modem is rebooting. This step will take about 3 minutes.
17. When the upgrade is complete you will be taken to the 'Modem GUI Login' screen. Wait 2 minutes for the DSL and Internet lights on the modem to turn green before trying to access the internet.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related CenturyLink Drivers