Ubiquiti EdgeSwitch ES-16-XG Switch Firmware 1.7.3 Download

Posted at December 22, 2024 by PCI-DB Team

Ubiquiti EdgeSwitch ES-16-XG Switch Firmware 1.7.3 Description

New features

- [UNMS] Add UNMS support. Add Ubiquiti Network Management System (UNMS) client on EdgeSwitch. It helps EdgeSwitch to connect an instance of UNMS. You can then use UNMS to manage the device as well as see statistics of its operation.
- [POE] Add PoE ping watchdog feature. The PoE ping watch detects the specific remote ip-address/host by ping and does auto power reset when lost detection.
- [POE] Add PoE power reset. This feature powers off and turns it on after the specific time.
- [POE] Add PoE power keeper feature. This feature keeps the power during software reboot (reload).

Default configuration changes

- [SYSTEM][SNMP] remove R/W private communities in default config.

Bug fixes and enhancements

- [STP] fix STP path costs.
- [STP] add log message when port role transition.
- [STP] lower log level when receive invalid BPDU type.
- [LLDP] fix packet buffer in LLDP.
- [LLDP] fix wrong behavior when some VOIP phone warm reboot.
- [POE] enhance PoE log.
- [RADIUS][CLI] add Radius server key with plain-text password.
- [SYSTEM] reduce some bootup time.
- [SYSTEM][LAG] Fail to fast-apply link speed/autoneg if port is in LAG.
- [SYSTEM][ES16XG] improve 10G link speed on 10GBaseT ports.
- [SYSTEM] fine tune SFP+ tx parameters in ESGH and ESWH models.
- [SYSTEM][Auto-Detect] Improve SFP+ and DAC compatibility.
- [SYSTEM] upgrade lighttpd and openssl.
- [SYSTEM][ESGH] fix some issue with abnormal transceiver.
- [SYSTEM][EP-S16] fix abnormal DC-IN current value when source not plug-in.
- [SYSTEM][COUNTER] Tx/Rx jumbo frame counter error.
- [SYSTEM][SNMP] add snmp-server enable/disable.
- WEBUI: System > Advanced Configuration > SNMP > Server Configuration
- [SYSTEM][SNMP] remove R/W private communities in default config.
- [SYSTEM] lower log level when ping error.
- [SYSTEM] change measurement method on cpu utilization and add processes utilization.
- [DHCPc] remove wrong log message in specific DHCP option.
- [CLI] check mode when remove policy-map <policy-name>.
- [CLI] Add "show interfaces switchport general", "show interfaces switchport trunk" and "show interfaces switchport access" in "show tech-support".
- [CLI] fix incorrect protected port information in "show interfaces switchport"
- [VLAN] vlan tag can't be removed after exclude -> include vlan.
- [MULTICAST] allow mDNS packets in IGMP snooping.
- [DOT1X] fix some FDB problems when mac migration between dot1x ports.
- [WebUI] reduce size.
- [WebUI] search icon artifact
- [WebUI][SNMP] fix community group.
- [WebUI] set System Command Prompt by System Name (System > Summary > Description).
- [DHCP] enable DHCP relay.
- [HTTPS] optimize checker for some certificates.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Ubiquiti Drivers