Broadsoft Snom300 IP Phone Firmware 7.3.4 Download

Posted at December 22, 2024 by PCI-DB Team

Broadsoft Snom300 IP Phone Firmware 7.3.4 Description

Features:

- duration display for a connected call on (snom370) is hh:mm:ss
- show IVR dtmf on display during connected state (snom370)
- consistent behavior for incoming calls in menu states
- new setting show ivr digits to control digit display while connected (snom360/ 370)
- unicode characters are displayed properly in title line and soft key texts on (snom360)
- added settings subscription delay, terminate subscribers on reboot and functionality (from v6.5)
- show uboot version, uptime and memfree on system info page
- support for $display local, $display remote, $expansion module, $active key in Action URLs (also within path)
- print out uptime and memfree to the (sys)log once a day
- show uboot version on OID 1.3.6.1.2.1.7526.2.4 as well
- new OIDs 1.3.6.1.2.1.7526.2.7 and 1.3.6.1.2.1.7526.2.8 for memfree and uptime respectively
- language files can be loaded via TFTP as well
- modified RTCP so that it also sends SDES CNAME with the RTCP SR

Bugfix:

- missing password warning was shown on display even if setting ignore security warning was enabled (snom370), fixed
- redirection * codes were not working
- setting http scheme doesn't need restart to get applied
- default value of setting http scheme was wrong, it's off now
- on error code 500 (which may mean ethernet port isn't open, most probably due to a switch which blocks it temporarily) retry the request several times

Installation Instructions:

- Right-click on the appropriate link for your device and choose Copy shortcut:
Open the Web User Interface and navigate to the Software Update page
Paste the link into the Firmware field
(Web User Interface -> Software Update -> Firmware)
- Press Load
The Device reboots and starts the software update.
Note: Do not disconnect the power at any time during this process!
- Check your firmware version afterwards

About VoIP Phone Firmware:

Firmware updates for VoIP Phones are very important as they usually contain many bug fixes, add new features and updates, as well as add additional security features.

One of the main problems users come across when attempting to upgrade their VoIP Phone is that their device may be locked to a certain Carrier. Adding an unlocked version of the firmware may cause the device to stop working on certain networks. This operation may void your carrier warranty and, as such, is not recommended.

Before downloading, make sure that you have selected the appropriate firmware for your device and that the update supports the VoIP service provider you use.

Generally, it is important to upgrade older firmware in sequence (v1 to v2 to v3) and so on, because many manufacturers don’t launch standalone update packages.

Although using beta release firmware packages is tempting, it can prove to be quite risky as well. If you choose to try beta release updates, please read the detailed firmware notes and make sure that you have the possibility to revert to an older and more stable version in case the beta turns out faulty.

If you feel that this update can improve the functionality of your VoIP Phone, please use the download button and follow the installation instructions.   

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related BroadSoft Drivers