Broadsoft Snom370 IP Phone Firmware 7.3.30 Download

Posted at December 26, 2024 by PCI-DB Team

Broadsoft Snom370 IP Phone Firmware 7.3.30 Description

Bugfix:

- Added new setting transfer_on_hangup_with_starcode to allow transferring calls on hangup if one call was picked up with PBX starcode. (SCPP-906) 
- Clean paint area for title (snom370). (SCPP-1191)
- Codec type and TX-RX stats could not be displayed anymore during call at the display. (SCPP-1206)
- Don't handle key event F_LOGOFF_ALL if a line is connected or on hold. (SCPP-1203)
- Don't resend ring command if phone is already ringing even if there is more than one incoming call. (SCPP-972) 
- Handle action of FKeys only if state isn't minibrowser state. (SCPP-1217)
- Setting Use Speaker Key to Receive Calls is valid for headsetkey too now. (SCPP-1154)
- Show LDAP result instead of display name if setting prioritise_pbx_number_lookup is off. (SCPP-1215)
- Send VQ-Report for hanging up on a holding line as well. (SCPP-1213)
- Make reregister after check-sync if necessary. (SCPP-985)
- UnREGISTER sets unregistered identity to inactive. (SCPP-599)
- Termination of Registration/Subscription initiated by check-sync notify works now. (SCPP-1126)
- Some setting changes were effecting other settings even though they were not changed by the user. (SCPP-1123)

Installation Instructions:

- Right-click on the appropriate link for your device and choose Copy shortcut:
Open the Web User Interface and navigate to the Software Update page
Paste the link into the Firmware field
(Web User Interface -> Software Update -> Firmware)
- Press Load
The Device reboots and starts the software update.
Note: Do not disconnect the power at any time during this process!
- Check your firmware version afterwards

About VoIP Phone Firmware:

Firmware updates for VoIP Phones are very important as they usually contain many bug fixes, add new features and updates, as well as add additional security features.

One of the main problems users come across when attempting to upgrade their VoIP Phone is that their device may be locked to a certain Carrier. Adding an unlocked version of the firmware may cause the device to stop working on certain networks. This operation may void your carrier warranty and, as such, is not recommended.

Before downloading, make sure that you have selected the appropriate firmware for your device and that the update supports the VoIP service provider you use.

Generally, it is important to upgrade older firmware in sequence (v1 to v2 to v3) and so on, because many manufacturers don’t launch standalone update packages.

Although using beta release firmware packages is tempting, it can prove to be quite risky as well. If you choose to try beta release updates, please read the detailed firmware notes and make sure that you have the possibility to revert to an older and more stable version in case the beta turns out faulty.

If you feel that this update can improve the functionality of your VoIP Phone, please use the download button and follow the installation instructions.         

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related BroadSoft Drivers