Hasselblad H5D-50 Multi-Shot Camera Body Firmware 3.3.3/1.1.5 Download

Posted at November 2, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Hasselblad H5D-50 Multi-Shot Camera Body Firmware 3.3.3/1.1.5
Category	Scanner Digital Camera Webcam
Manufacturer	Hasselblad
File Size	300 KB
Supported OS	OS Independent

Hasselblad H5D-50 Multi-Shot Camera Body Firmware 3.3.3/1.1.5 Description

This package contains firmware version 3.3.3/1.1.5 for the H5D camera body.

Fixes:-

- Solves a rare issue where a short extra delay could be added to the exposure sequence
- Internal production support

Installation steps:
1. In order to perform the update the H5D sensor unit must be attached to the camera body.
2. Remove lens and viewfinder and connect the camera to the host computer using a FireWire cable. Make sure the computer has a fresh battery or is powered from the mains supply.
3. Start Phocus and when the camera is connected, as indicated by an active camera icon in the top left part of the screen, select “Update Firmware...” from the “File“ menu. Browse to the location where the update file (H5D150601.hbf) was saved and follow the instructions on screen.
4. The update procedure will take a few minutes to finish.

Important notice:

- The update should preferably be made by an authorized Hasselblad service center.
- Please use the latest version of Phocus for firmware updating. For Windows it is strongly recommended to use the 64 bit version.
- Use a computer with a powered FireWire cable for the update.

About General Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Hasselblad Drivers