TBS MOI+ IPTV Streamer Firmware 1.0.0 Download

Posted at December 31, 2024 by PCI-DB Team

TBS MOI+ IPTV Streamer Firmware 1.0.0 Description

How to update MOI+?

1. Download the latest software (system, kernel or u-boot)
2. Copy the software that you want to update to a USB flash drive (min. 1GB), for example, if you just need to update the kernel, then download only the latest kernel and copy it to the USB flash drive, if you copy all of the three files: system, kernel and u-boot, to the USB flash drive, MOI+ will update all of them and it will take a bit longer.
3. Make sure your MOI+ is powered off, connect the USB flash drive to it, and then power on, the update will start, on the LCD screen it dispalys:
- "Welcome MOI+"
- When updat the u-boot, it shows the u-boot loading progress in percentage (%)
when update the kernelit shows the kernel loading progress in percentage (%)
when update the system, it shows the system loading progress in percentage (%) and "Reading, please later..."
4. After the update completes (takes about 5 minutes), the IP address will be displayed on the LCD screen, make sure the network cable is connected.

NOTE:

There is no need to restart MOI+ after the update. To check the version, you can go to the web user interface by entering the IP address displayed on the LCD screen to the address bard of the browser.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TBS Drivers