EnGenius EDS5255 IP Camera Firmware 1.0.3 Download

Posted at December 21, 2024 by PCI-DB Team

EnGenius EDS5255 IP Camera Firmware 1.0.3 Description

Firmware Update:

- New firmware may contain bug fixes or feature improvement which is beneficial to you.
- Either download the latest firmware file to your local computer or use Auto Firmware Upgrade when Internet connection is available.
- For manual upgrade, click Browse and select the firmware file to start upgrading firmware.
- Select the downloaded new firmware then click on Open.
- Click Apply to start upgrading the firmware.
It may take a moment for the upgrading process, please wait patiently.

WARNING:

Do not turn off the device in the middle of upgrade process. Terminating the device during the process will damage the device and may cause the device to fail.

About Network Camera Firmware:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EnGenius Drivers