NETGEAR GS116E Switch Firmware 1.00.19 Download

Posted at December 18, 2024 by PCI-DB Team

NETGEAR GS116E Switch Firmware 1.00.19 Description

New Features and Enhancement:

- Make loop detection configurable.
- Allow the forwarding of ICMP PING packet with size greater than 512 bytes.
- Add password encryption.

Bug Fixes:

- Change the default setting of loop detection from enable to disable.

Installation Instructions:

- Download the new firmware and store it in local PC, and remember its location in the PC’s file system.
- Unzip it to get the switch firmware image
- There are two methods to upgrade the new firmware from PC to the switch.
- Go to GUI page “Maintenance > Firmware Upgrade".
- Click the Browse button and locate and select the new firmware image file.
- Click the Apply button.
- When the upgrade is complete, your switch restarts. The upgrade process typically takes about three minutes.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers