ContourRoam3 Action Camera Firmware Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ContourRoam3 Action Camera Firmware
Category	Scanner Digital Camera Webcam
Manufacturer	Contour
File Size	12.7 MB
Supported OS	OS Independent

ContourRoam3 Action Camera Firmware Description

The Roam3 is Contour´s best camera yet. It was built to be the easiest-to-use action camera on the market, and comes with everything you need to start your adventures right out of the box. With a rugged aluminum body, and waterproof up to 30 ft. without a case, the Roam3 is perfectly suited for year-round adventures.

- Waterproof up to 30 ft. without a case
- Quick Photo Mode (5MP)
- 270° Rotating Lens
- Laser alignment
- Long Lasting Built-in Rechargeable Battery
- Locking Instant On-Record Switch
- 8GB Memory Card Included
- 1080p HD Video
- Still Photo Mode
- Up to 120 fps
- 170° wide-angle Lens

CONTOUR ROAM3 FIRMWARE INSTALLATION WITHOUT STORYTELLER

In some situations, it may be necessary to manually update the firmware without the assistance of Storyteller. Here are the steps to manually update the firmware:
1. Format the microSD Storage Card before beginning any firmware update.
2. Download the Contour ROAM3 firmware to your desktop.
3. Plug the Contour ROAM3 camera into your computer using a USB cable. Check to see that the Record slider is not in the forward (or ON) position. Once connected, the Battery LED on the Contour ROAM3 will turn red and the camera will appear as an external USB device on your computer.
4. On your computer, navigate to the camera which is mounted as an external storage device.
5. Copy the ContourROAM3.bin file that you downloaded in Step 2 to the camera's microSD card. Do not put it in any subfolders on the camera's microSD card.
6. On the microSD card of the camera will be a file called FW_RTC.txt. The file may be hidden and you may need to enable the ability to view hidden files in your computer's settings. Open the FW_RTC.txt file with a text editor application.
7. Near the top of the file is a line of text that reads ‘UPDATE_FW:N’. Change the ‘N’ to a ‘Y’ so it appears as ‘UPDATE_FW:Y’ and save the file. This will instruct your camera to update the firmware when it next starts up. 8. Unplug the camera from your computer. It you are using a Mac, don't forget to unmount (eject) the camera before unplugging it. 9. Press and release the Status Button. The camera will beep and the Memory and Battery LEDs will flash while the update is in progress. When the update is completed the camera will beep again and turn off. 10. Reformat the microSD card by following the instructions from Step 1.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Contour Drivers