Edimax IR-112E Network Camera Firmware 1.03.21 Download

Posted at December 3, 2024 by PCI-DB Team

Edimax IR-112E Network Camera Firmware 1.03.21 Description

2Mpx Outdoor PoE True Day & Night Bullet Network Camera

- Night vision with built-in IR LEDs (up to 15 meters)
- Full HD 1080P (1920 x 1080) @10FPS & HD 720 (1280 x 720) @30FPS
- H.264, MPEG-4 & M-JPEG multi-stream output
- Supports IEEE802.3af Power over Ethernet (PoE) standard
- IR LEDs with mechanical ICR for day and night monitoring
- Simultaneous live monitoring and high resolution recording
- 3GPP mobile application
- IP66 weather–proof construction

About Network Camera Firmware:

Applying the appropriate software for your network camera helps computers properly connect with the device, and adds support for various surveillance features that the camera benefits from (such as monitoring specific areas).

If you’re considering a software upgrade, you should know that this process might improve the unit’s overall performance and stability, add support for new features (or enhance existing ones), or include fixes for various issues. However, bear in mind that not all software updates bring significant changes.

As for the installation method, the steps vary depending on the type of software that you are about to apply; so, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device.

If you're thinking about applying this software version, hit the download button and update your camera once you have familiarized yourself with the installation method. In addition to that, don’t forget to check with our website as often as possible so that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Edimax Drivers