NETGEAR XCM8810 Switch Firmware 12.3.4.5-1-4 Download

Posted at November 2, 2024 by PCI-DB Team

NETGEAR XCM8810 Switch Firmware 12.3.4.5-1-4 Description

Changes:

1 LLDP 802.1ab
2 LLDP MED
3 Jumbo Frame
4 Port trunking (static /802.3ad)
5 Port Based VLAN
6 Tagged VLAN
7 Protocol Based VLAN
8 STP/RSTP/MSTP
9 Web-Based Device Management
10 Virtual Routers
11 VRRP
12 IPv4 Unicast Routing
13 RIP
14 RIPng
15 OSPF v2(limited to max of 4 active interfaces)
16 OSPF v3(limited to max of 4 active interfaces)
17 IPv4 Multicast L2 Switching
18 IGMPv1/v2/v3 Snooping
19 PIM SM(limited to max of 2 active interfaces)
20 MLD
21 QoS - egress port rate shaping/limiting
22 ACL
23 Routing Policies
24 MAC Security
25 DHCP Snooping
26 Denial of Service
27 RADIUS authentication
28 TACACS+ authentication
29 SSH2
30 SSL
31 SNMPv1/v2/v3

Network login

- Web based method
- 802.1x method
- MAC based method
- Local database for MAC/Web based methods
- Integration with Microsoft NAP
- Multiple supplicants - same VLAN
- HTTPS/SSL for web-based method

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers