TP-Link TD-8840T V3 Router Firmware 120531 Download

Posted at December 18, 2024 by PCI-DB Team

TP-Link TD-8840T V3 Router Firmware 120531 Description

ADSL2+ Modem Router

- Provide Internet access via ADSL Service and create a wired sharing network, all with one product
- Works with the latest ADSL standards: up to 24Mbps downstream superior performance
- Live Parental Controls allow parents or administrators to establish restricted access policies for children or staff
- IP QoS features for improved bandwidth control across the network

Modifications and Bug Fixes:

- "Added supports of DHCP Portfilter and Static IP .
- Added supports of NO-IP
- UPNP,IGMP Snoop and IGMP Multicast default mode is enabled"

How to upgrade TP-LINK ADSL Modem Router

Step 1: Log into the ADSL Modem Router by typing http://192.168.1.1 in the address bar of the web browser. The User Name and Password are both admin unless you have changed it before.
Step 2: Click System Tools ->Firmware Upgrade, click the Browse button to choose the firmware you already extracted in the folder.
Step 3: Click the Upgrade button. The device will reboot automatically after the upgrading has been finished. Please wait about 3 minutes.
Step 4: Click Status, verify that the router’s firmware has been upgraded.
Step 5: It is recommended that restoring the device to factory default to make the new functions take effect; Click System Tool->Factory Default, Click Restore Button.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TP-Link Drivers