Cisco RV325 Router Firmware 1.1.1.06 Download

Posted at April 26, 2024 by PCI-DB Team

Cisco RV325 Router Firmware 1.1.1.06 Description

Changes:

- RV320: Users could enter ampersand (&) and percentage (%) symbols in the PPPOE username field. (CSCue64461)
- IP/MAC binding clients of a non-default VLAN are unable to access the Internet. (CSCug28848)
- When the host name or the domain name is modified, the web GUI displays an error. (CSCue24358)
- Users are unable to modify or save custom services. (CSCui03038 )
- Client devices behind 6rd tunnels are unable to ping each other. (CSCui03071)
- When users update the Priority field in the Protocol Binding Table, the priority is set incorrectly. (CSCuh97775)
- For some NICs, such as Intel 82579LM, when Energy-Effecient Ethernet (EEE) is enabled for a LAN port, data traffic does not pass through the data link and the Link Status is incorrectly displayed as connected. (CSCuh83162)
- When users disconnect a USB dongle, the GUI continues to display the status as connected. (CSCuh59490)
- DHCP relay fails over LAN and through VPN tunnel if the server is not in the default VLAN (CSCuh91354)
- An error is encountered when more than 26 port forwarding entries are added. (CSCuj43055)
- When the device is kept running for many days continuously, the device faces a memory leak and crashes. (CSCuj36179)
- The firewall SynFlood and DoS attack threshold was high and prevented traffic from VPN peers. (CSCuj57476)

Installation Procedure:

- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Cisco Drivers