Cisco SPA512G IP Phone Firmware 7.5.5 Download

Posted at November 17, 2024 by PCI-DB Team

Cisco SPA512G IP Phone Firmware 7.5.5 Description

Fixes:

- Outbound network packets with length 508, 509, and 510 bytes misses VLAN tags for the SPA51X phones.
- Audio is not heard during the first 8 seconds on each incoming call to the hunt group in the VOIPnow PBX environment.
- Programmable LED parameter <Service Subscribing LED> has no effect.
- The SPA5x5 phone gets a page notice, after hanging up a multicast paging call configured on Asterisk server.
- Incorrect display of Czech and French characters after version 7.4.8.
- In the SPCP mode, the phone displays wrong characters for the French locale pack (UC540).
- The phone becomes unresponsive while performing an LDAP directory search in Broadsoft Environment.
- The phone reboots while performing a search in Broadsoft Enterprise Directory when the server is unavailable.
- Improper provisioning management of HTTP 302 redirect causes the phone to become unresponsive.
- For Cisco XML Service, EXECUTEITEM does not work properly for playback of DTMF tones.
- The phone becomes unresponsive on a slow network, when using sidecar (500 or 500DS) with many BLF configured, as it does not receive all the 200 OK responses from the server.
- In SPCP mode, the phone loses BLF information.
- On a shared line, quick offhook/onhook triggers the phone to send quick NOTIFY messages to the server, and the server sends 480 code to the phone. Added a parameter, <SCA Unseize Delay> to allow shared line unseize delay to be configured.
- Users cannot use a semi-colon in the report rule as semicolon is used as the delimiter for configuration report rule and status report rule.
- Increase the SIP account password parameter to a maximum of 64 characters.
- The phone constantly reboots, when the provisioning profile rule is too long (greater than 256) using EMS & MUID macros.
- When a call is not answered, the call does not connect to the voice mail if no ringtone is selected. Added a parameter, <Silent Ring Duration> to control the duration of the silent ring.
- When parameter <User Equal Phone> is enabled, the headers; FROM, TO, and the request line of all the SIP messages during a call will be attached with a <user=phone> parameter.
- In the SPCP mode, the phone displays incorrect system message in French.
- A typo in the phone Web GUI; in the Custom CA Status section, "Custom CA Provisioning Status" is missing an "n".
- During a call pickup event, the phone should not update the remote party CallerID when the Remote-Party-ID or PAssert- Identity header is not provided in the SIP re-INVITE message.
- A parameter, <Use Line Keys For BLF List> is needed to use the line keys first for Broadsoft BLF list feature. Previously, the phone used only side-car keys for Broadsoft BLF list feature.
- In Hebrew mode, when the user edits the personal address book, the editing cursor moves to the opposite direction of the button pressed.
- The phone becomes unresponsive when long SDES CNAME (greater than 47 characters) or long NAME (greater than 31 characters) is used in RTCP packets.
- When Do not Disturb (DND) is enabled on SPA508G phone, paging calls are received.
- When the phone is in an active call and initiates another call, the corresponding BLF button blinks red as if the phone is ringing.
- In SPCP mode, the incoming FXO calls ring as internal calls for Cisco SPA508/500S phones.
- In SPCP mode, the phone becomes unresponsive while browsing the SETUP menu in Dutch.
- The SIP TCP session gets reconnected on wrong ports upon TCP connection failure when the TCP Port values for Min. and Max. are the same.
- After 24 hours of bulk calls for stress testing, SPA51X phone with sidecar becomes unresponsive.
- When connected to UC540/UC560, SPA51X phone becomes intermittently unresponsive
- If the font size is 12, then the Hebrew character will be cut off from the top.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Cisco Drivers