Cisco RV325 Router Firmware 1.1.1.19 Download

Posted at December 22, 2024 by PCI-DB Team

Cisco RV325 Router Firmware 1.1.1.19 Description

Enhancement:

- The former “QoS: CoS/DSCP Setting” has been renamed as “Map DSCP to queue”, and “DSCP Marking” has been renamed as “Map CoS to DSCP”.
- Upgrade the OpenSSL to 1.0.1h.
- PPTP enhancements
- Support the interaction with the PPTP servers in different subnets.
- Support customized DNS server under PPTP mode.
- Support the new USB dongle: D-LINK DMW-157, Pantech UML290, Huawei EC1260 & E172, Huawei E3276, Sierra AC320U, Sierra AC340U

Resolved Issues:

- Cannot establish VPN tunnel when security group is changed. When the local security group changed, the VPN tunnel cannot be established. (CSCul55278)
- Cannot Change Hostname if LAN IP is in the 192.168.x.100-150 range. Unable to change the hostname or the domain name if the LAN IP is in the range of 192.168.x.100-150. (CSCul16754)
- In IP & MAC Binding, editing an existing entry which contains space (i.e. “Nexus 7") causes the space and the following characters dropped. (CSCuo66423)
- Error occurs when printing Incoming Log Table. (CSCuo66451)
- The “Sessions” and “New Sessions/Sec” of the system statistics are always 0. (CSCum55099)
- The length of the fully qualified address name of the backup VPN tunnel is limited to 19 characteristics. (CSCuo05632)
- Not able to edit and save the IP range under SSL VPN advanced settings. (CSCuo89496)
- If the router has more than 30 Services in Service Management, the router displays critical error. (CSCuo71846)
- The device freezes when it receives two ARP requests from WAN and LAN port with the same MAC address. (CSCum32823)
- Unable to edit or delete the Port Address Translation rules when there are 50 rules entered via UPnP discovery. (CSCun66677)
- When deleting a custom service and adding another custom service from port forward page, the deleted custom service will re-appear when adding port forward. (CSCup07198)
- Cannot edit the Host Name or Domain Name if the LAN IP address is 192.168.150.100. (CSCul16754)
- Unable to import the 3rd party authorized SSL certificate. (CSCuo63967)
- The device changes the WAN IP address without linking UP/DOWN, which causes VPN connection failure. (CSCuq36685)
- When configuring the access rule for the service as “Deny”, it says Connection Accepted in the Incoming Log Table. (CSCuo39694)
- The RV325W device should support 17 VLANs. (CSCuq28029)

Installation Procedure:

- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Cisco Drivers