NETGEAR GSM4352PB Switch Firmware 12.0.2.15 Download

Posted at December 26, 2024 by PCI-DB Team

NETGEAR GSM4352PB Switch Firmware 12.0.2.15 Description

Bug Fixes:

- The fiber port can be up when some fiber module is inserted without cable.
- After stack(AXC761 used) reload hosts on slave, switch fails to access management interface(via SSH or https)
- M4300 supports AXM765 on 12.0.2.14.
- Mikrotik RoMON services not passing through M4300 switches.
- Fiber ports link down when there are 4 fiber modules in the same port block.
- 'show stats group port-utilization' should display utilization percentage(%) format.
- Switch SNMP refuse to connect despite the MIB saying it is read-write.
- When one user log in the switch through telnet/ssh, it is not logged on the switch.
- Fixed some vertical privilege issues.
- Fixed some stored XSS issues.
- Fixed some reflected XSS issues.
- User can get local file info using HTTP method.

Known issues:

- Loop Protect functionality does not work if igmpsnooping is enabled. 

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers