NETGEAR GSM7248v1 Switch Firmware 6.3.3.7 Download

Posted at November 2, 2024 by PCI-DB Team

NETGEAR GSM7248v1 Switch Firmware 6.3.3.7 Description

New Features/Enhancements/Bug Fixes:

- Added NETGEAR public SNTP server as default
- Added warning message during upgrade via CLI
- Dot1x: macbased authentication doesn’t work
- SNTP:‘SNTP server time-f.netgear.com’ will cause ‘script apply’ ceased
- SNTP: additional character for command 'clock timezone'
- STP: path external-cost changed while modifying path cost
- "show port status all" output always show STP mode of port channel as Blocked.
- If SNTP server responds with "Server Kiss of Death" message, the switch does not retry SNTP request
- LAG could stop fowarding traffic after running a period of time
- GSM7248 MTU setting not allowed on CLI
- MTU showed via SNMP is wrong
- DHCP server error message is cryptic
- “ezconfig” does not ask for default route/gateway
- Console port hang up while executing "show hosts"
- DHCP: wrong client identifier in show pool configuration
- GSM7224: GUI do not display the configuration revision level correctly when MST is used
- GSM7224: DNS client does not seems to be working
- GSM7224: SSH session hang when pinging from the CLI
- GSM7224: console and web session hang when attempt to include all ports (or a lot) into port monitor
- GSM72xx: Sometime under heavy traffic, the switch may fail to clear mac address table at user’s command
- GSM7212/GSM7224: Sometime the switch may failed to learn the MAC address correctly under heavy traffic
- The interface name in error message are wrong when a port is added to LAG group that it already is a member.
- SNTP: the same SNTP server can be added twice.
- Traffic destined to VMAC stop forwarding after rebooting VRRP master
- Using xmodem protocol to perform firmware upgrade or configuration file update by serial port might fail
- DNS error message is crypted
- Switch will not pass IS-IS packets  

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers