NETGEAR GSM7224v2 Switch Firmware 8.0.1.27 Download

Posted at December 26, 2024 by PCI-DB Team

NETGEAR GSM7224v2 Switch Firmware 8.0.1.27 Description

Bug Fixes:

- Need to shut down the port when broadcast storm occurs and log it in buffer. 
- Need to change STP default from MSTP to RSTP on 8.x and forward.
- GSM7224v2 does CPU forwarding after host(arp) number increases more than 120.
- Device hangs during the second SSH connection to GSM7224v2.

NOTES:

- Some of 7.x CLI commands may have command syntax changes in 8.0.
- The configuration of 7.x switch should be migrated to 8.0 during upgrade, but it is possible that after the upgrade, the configuration of the old may be lost.
- On certain GSM73xxS, the flash image may contain temporary files are taken up spaces and preventing the firmware upgrade. Please check with customer for how to clean up the flash if you encountered failure during upgrade. 

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers