NETGEAR GS116Ev2 Switch Firmware 2.6.0.22 Download

Posted at November 19, 2024 by PCI-DB Team

NETGEAR GS116Ev2 Switch Firmware 2.6.0.22 Description

New Features & Enhancements:

- Fixes the issue where the fan failure LED may light up falsely for certain units 

WARNING:

- After JGS516PE and GS116Ev2 are upgraded to FW version V2.6.0.21 or higher, it cannot work with Plus Utility version prior to V2.7.2.
- Do not interrupt the network connection or power to the switch, or refresh or close the browser window during this process. Do not disconnect any Ethernet cables or power off the switch until the process is complete.

Upgrade Procedure:

- Download the new firmware and store it in local PC.
- Unzip it to get the switch firmware image (.bin format).
- Go to GUI page “Maintenance > Firmware Upgrade"
- Click the Browse button and locate and select the new firmware image file.
- Click the Apply button.
- When the upgrade is complete, your switch restarts. The upgrade process typically takes about three minutes.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers