NETGEAR FSM7226RS Switch Firmware 8.0.1.9 Download

Posted at December 22, 2024 by PCI-DB Team

NETGEAR FSM7226RS Switch Firmware 8.0.1.9 Description

Changes:

- Fix some errors on help page
- Some commands lost after upgrade from 7.3.3.3
- SNMP community string not accepted in GUI. but works fine in CLI
- Maximum Number of Remote Connection Sessions should be 5 instead of 4
- Fix some GUI issues
- LLDP is sending out the wrong management IP address to the remote partner
- TACACS+:telnet is unable to go into privilege mode when telnet use tacacs+ as enable method
- It is failed to configure radius accounting server without name on GUI
- boot menu option 13 doesn't recover password
- Need to change flash memory setting on GSM73xxS v2
- During factory burn-in, some FSM726v3 crashed
- FSM726E floods EAP success message and freezing.
- GUI: failed to show login help page.
- DoS GUI: ICMPv6 option is missing on FSM726v3
- STP Topology change notification log message are missing.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers