NETGEAR S3300-28X-PoE+ Switch Firmware 6.6.4.7 Download

Posted at November 21, 2024 by PCI-DB Team

NETGEAR S3300-28X-PoE+ Switch Firmware 6.6.4.7 Description

New features and enhancements

- Support mixed stacking between S3300 series and two 10G models from M4300 series (M4300-24X or/and M4300-12X12F).
- Add configurable option to disable/enable Smart Control Center (SCC) Utility under GUI page of ‘Security > Management Security > SCC Control’.
- Add configurable option to select different HASH algorithms for LAG under GUI page of ‘Switching > LAG > LAG Configuration’.
- Please find detailed description on the S3300 User Manual of firmware 6.6.6.4. Specifically, section "Smart M4300/S3300 Firmware Upgrade Procedure" (page 356~359 of the user manual) describes the detailed procedures regarding building mix-stack system between S3300 and M4300 with 6.6.4.x firmware.

Known issues

- SFP+ model AXM765 cannot be used as 10G stacking. [Workaround]: Use other SFP+ models AXM761, AXM762, AXM763 or DAC cable AXC761/AXC763 instead.
- RPS/AC hot swap sometimes (quickly unplug/plug) does not take effect after plug back APS1000W power cord. [Workaround]: re-plug the APS1000W power cord slowly.
- Console hang happens in S3300 device, if we press the reset button repeatedly during reload. [Workaround]: Power cycle the switch. Customer needs to be cautious not to press reset button multiple times during boot stage.

Notes

- The released zip contains switch firmware (s3300v6.6.4.7.stk) and MIB files. Please unzip the file to extract the switch image for firmware upgrade.
- Please do download v6.6.4.7 to both active and inactive (backup) images when upgrading from v6.4.0.x firmware.
- Please clear the browser’s cache to login the switch via Web GUI after upgrading firmware to v6.6.4.7 from v6.4.0.x, v6.6.0.x, or v6.6.1.x firmware.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers