Posted at December 25, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | NETGEAR GS748Tv2 Switch Firmware 3.0.3 |
---|---|
Category | Router Switch Access Point |
Manufacturer | NETGEAR |
File Size | 1.3 MB |
Supported OS | OS Independent |
- Fix the bug that PVID of a non-LAG port cannot be changed if a LAG is currently using the same PVID as the port
- Egress packets from a mirrored port will always contain VLAN ID.
- Workaround: Please ignore the VLAN ID.
- Non-trusted MAC addresses of ARP packets will be learned and displayed on the MAC Address table.
- Workaround: There is no deviation to the Trusted MAC address behavior. Please ignore non trusted MAC addresses on the learning table.
- The LAGs setting will be cleared after upgrade from v 1.0.3_10 due the LACP functions are new added, user have to re-configure LAG even the LAGs are static mode.
- Download the new firmware to a convenient place on your local system (e.g., C:downloads).
- Start Smartwizard Discovery Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing.
- In Smartwizard Discovery window, click Discover to find your Smart Switch. The switch will be listed in the device list table once found. (Note: Smartwizard Discovery uses broadcast packets to find Smart Switches, which means it can only find Smart Switches in the same routing domain.)
- Highlight the Smart Switch to upgrade and click Firmware Upgrade.
- Follow the screen prompts to complete the upgrade. Smartwizard Discovery will report a successful completion at the end.
Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.
Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.
Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.
It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.
That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Router Switch Access Point File Size: 14.7 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 14.7 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 26.3 MB OS Independent
Install DriverDevice Type: Network Card File Size: 24.9 MB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1
Install DriverDevice Type: Firmware File Size: 7.4 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install DriverDevice Type: Router Switch Access Point File Size: 30.9 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 30.9 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 14.7 MB OS Independent
Install DriverDevice Type: Firmware File Size: 18.9 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install DriverDevice Type: Network Card File Size: 20.2 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.