NETGEAR GS724TPv2 Switch Firmware 1.1.1.3 Download

Posted at November 5, 2024 by PCI-DB Team

NETGEAR GS724TPv2 Switch Firmware 1.1.1.3 Description

New Features and Enhancements:

- Added IPv6 ACL (Security > ACL > Advanced > IPv6 ACL/Rules)
- Added IPv6 QoS (QoS > DiffServ > Advanced > IPv6 Class Configuration)
- Added IPv6 DHCP client (DHCPv6) (System > Management > IPv6 Network Configuration)
- Added Client Summary page to Security > Port Authentication > Advanced
- SNTP supports IPv6 (Add option "IPv6" to Server Type in System > Management > SNTP Server Configuration page)
- Replace TLS1.0 with TLS1.2 (Security > Access > HTTPS > HTTPS Configuration)
- Added proprietary Layer 2 Loop Protection (Switching > L2 Loop Protection)
- Added an option "Auto" to Fast Link in Switching > STP > Advanced > CST Port Configuration page
- Added feature "BPDU Forwarding" to Switching > STP > Advanced > CST Port Configuration page
- Added an option "Forbidden" to Interface Status on Multicast Group Membership and Multicast Forward All pages (Switching > Multicast > Static Multicast Address > Multicast Group Membership & Multicast Forward All)
- Added an option to "Block Unknown Multicast Address" (Switching > Multicast > IGMP Snooping > IGMP Snooping Configuration)
- Added an option of “MAC Auth Bypass" to Port Control under Security > Port Authentication > Advanced > Port Authentication page.  

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers