NETGEAR GS724Tv2 Switch Firmware 1.0.2 Download

Posted at December 22, 2024 by PCI-DB Team

NETGEAR GS724Tv2 Switch Firmware 1.0.2 Description

Features added:

1. Trusted MAC
2. Broadcast Storm Control
3. ToS and DSCP

Enhancements:

1. Added checks to reject invalid inputs on the web user interface.
2. ARP table is cleared when VLAN type is changed.

Bugs fixed:

1. Unable to modify a VLAN when the one of the member ports is tagged and the PVID equals to the VLAN ID.
2. Unable to tag a Port in the default VLAN when using PVID 1.
3. Can’t manage the switch via a tagged VLAN, because packets generated by the switch do not have tag.
4. IGMP packets are not forwarded.
5. The linkUp and linkDown traps are not sent when spanning tree (STP) feature is enabled.
6. Unable to change Flow Control setting on the fiber port when the link is up.
7. From the Smartwizard discovery tool, DHCP refresh always return “successful” even when the switch fails to obtain an IP address from the DHCP server.
8. BPDU packets are not forwarded if spanning tree feature (STP) is disabled.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers