NETGEAR GS716Tv1 Switch Firmware 1.1.0 Download

Posted at December 22, 2024 by PCI-DB Team

NETGEAR GS716Tv1 Switch Firmware 1.1.0 Description

Modifications/Fixes

- Support for SNMP v1: the GS716T will respond to queries from SNMP-based software.
- Jumbo frame support: when active, the GS716T will not drop over-sized frames, but will forward them on. Limited to 9,500 byte frames.
- Spanning Tree: the GS716T will participate in the IEEE 802.1D Spanning Tree protocol to prevent loops

Installation Instructions

- WARNING:- It is required to restore the device back to factory default after upgrading to this firmware version.
- Download the new firmware to a convenient place on your local system (e.g., C:downloads).
- Start Smartwizard Discovery utility, (included on the CD that came with your Smart Switch). If it is not installed, do so now, before continuing.
- In Smartwizard Discovery window, click Discover to locate your Smart Switch. The switch will be listed in the device list table once found. (Note: Smartwizard Discovery uses broadcast packets to find Smart Switches, which means it can only find Smart Switches in the same routing domain.)
- Highlight the Smart Switch to upgrade and click Firmware Upgrade.
- Follow the screen prompts to complete the upgrade. Smartwizard Discovery will report a successful completion at the end.
- You must reset the device to factory defaults after upgrading the firmware. 

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers