NETGEAR GSM7324 Switch Firmware 6.3.3.6 Download

Posted at December 19, 2024 by PCI-DB Team

NETGEAR GSM7324 Switch Firmware 6.3.3.6 Description

New Features/Enhancements/Bug Fixes:

- Add Netgear public SNTP server as default
- Add warning message during upgrade via CLI
- Dot1x: MAC based authentication doesn’t work
- SNTP:‘SNTP server time-f.netgear.com’ will cause ‘script apply’ command to failed
- SNTP: additional character for command 'clock timezone'
- STP: path external-cost changed while modifying path cost
- "show port status all" output always show STP mode of port channel group as Blocked.
- If SNTP server reply with "Server Kiss of Death" message, the SNTP client in the switch will stop
- LAG stop fowarding traffic after running a period of time when GVRP is enabled
- MTU value shown via SNMP is wrong
- DHCP server error message is cryptic
- ezconfig does not prompt for default route/gateway
- Console port might hang while executing "show hosts"
- Wrong client identifier shown in the DHCP show pool configuration page
- The Interface names in error message when a port is added to a LAG group which it is already a member of, are wrong
- SNTP: the same SNTP server IP address or name can be added twice.
- DNS fails to work
- GSM7312 does not detect SFP port problem when TX side failed but RX is working
- Traffic destined to VMAC stop forwarding after rebooting VRRP master
- Updating firmware or config file via XODEM protocol does not work over serial port
- DNS error message is crypted
- Switch will not pass IS-IS packets 

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers