NETGEAR FSM7352PS Switch Firmware 7.2.1.6 Download

Posted at November 21, 2024 by PCI-DB Team

NETGEAR FSM7352PS Switch Firmware 7.2.1.6 Description

New Features/Enhancements:

- Extend IP ACL rule configuration for including TCP flag field as filtering criteria
- Add Protected Ports Feature

Bugs Fixed:

- If configuration steps contain command lines to set the same PVID for a port multiple times, the configuration file may not be saved when the save command is issued.
- On FSM7328S or FSM7352S where OSPF protocol is not supported but the configuration may show OSPF is enabled and can not be disabled from the CLI or GUI.
- Traffic destine to a VRRP virtual MAC address will stop being forwarded after the VRRP master is rebooted. No response on console and from GUI while modify MSTP port path cost thru GUI
- The switch would fail in using xmodem protocol to download file to the switch by serial port
- GUI MSTP: VLAN 24 can not be associated with MST instance.
- FSM73xxPS: POE load power consumption shows zero although POE is proving power
- OSPF GUI configuration page is missing “external-lsdb-limit” field
- HTTP firmware download failed while using GUI with HTTPS mode
- FSM7328S: DHCP server configuration web GUI page shows bad client id in manual mode
- FSM73xxS: Sometime firmware upgrade may failed due to old configuration can not be supported on newer version
- FSM7328S: the web GUI is showing unsupported features like OSPF and VRRP

Note:

- This version will support configuration migration from all previous to this version. However, if you decided, after the upgrade, to revert back to the version 6.x or older from this version, the configuration of the switch will be lost. For this reason, you may want to save your current configuration before the upgrade. 

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers