NETGEAR FSM7352PS Switch Firmware 7.3.1.7 Download

Posted at December 22, 2024 by PCI-DB Team

NETGEAR FSM7352PS Switch Firmware 7.3.1.7 Description

New Features/Enhancements/Changes:

- Support Private Group that allows creation an isolated group of ports that its member ports can talk to each other or ports that does not belong to any group, but not to another isolated group members.
- Support IEEE 802.1ab LLDP and LLDP-MED for discovery service. For instructions how to use the feature, please download the new “7.3 Command Reference Manual” from NETGEAR product support web site.
- Log the event when the firmware upgrade is completed
- Add support for erasing the password without erasing the configuration
- Support CPU port mirroring to allow monitoring of traffic in and out of the management CPU
- Improve the firmware upgrade process to reduce the chance of the upgrade failure which might be corrupting the boot up code
- Event log is no longer supported
- Change the default priority queue mapping for CoS queue and DSCP to the range of zero to two.

Bugs Fixed:

- The switch might crash when Force10 switch SSH clients is used to login the switch
- Sometime static ARP table entry can not be deleted
- FSM7352PS total available power setting was wrong when RPS is present
- Device view is not displayed when using https in SSL v3 mode
- Multicast: multicast entry is not aged out when unknown multicast filtering is enabled
- Sometime during upgrade the configuration file may be corrupted
- FSM7352S: Clear config command may not clearing all static ARP entries.
- Mis-configured port channel might cause packet buffer leak
- SNMPV3: SNMPV3 commands are not under 'show running config' after setting
- If the ports PVID is configured as non existing VLAN, CPU don't see the STP BPDU's through the port

Note:

- This version will support configuration migration from all previous to this version. However, if you decided, after the upgrade, to revert back to the version 6.x or older from this version, the configuration of the switch will be lost. For this reason, you may want to save your current configuration before the upgrade.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers